Saturday, December 21, 2019

OUTSOURCING IN WORKSHOPS


 Outsourcing – need to outsource

While it may be ideal to do most of the jobs in-house to ensure strict control over quality of inputs and processes, outsourcing the work to other agencies may become inescapable, under circumstances such as:
a. There is no possibility of getting it done in other Railway workshops with known capacity and capability for the product.
b. Sudden spurt in the requirement of components/sub-assemblies far beyond the capacity of the shops
c. Need to optimize and augment capacity of core shops (assembly shops) resulting in re-deployment of personnel from non-core to core shops (component to assembly shop) with consequent capacity reduction ofcomponent shop
d. Introduction of new material/technology for which skills/capacity/equipment may not be available within the workshop
e. Standard components that can be procured from outside or the work outsourced, resulting in lowering of cost. This is due to economy in scale of production available with the supplier.
f. Short-term / one time jobs for which permanent capacity cannot be created within the workshop
g. Need for heavy inputs of infrastructure not commensurate with the quantum of required by Railways for its production.
Under these circumstances, the shop in-charge should decide to opt for outsourcing. Outsourcing can be from either a unit outside the workshop premises or an outside agency which will be required to execute the task inside the workshop.

1104. Outsourcing to units outside the workshops.
Components and assemblies can be outsourced to unit a outside the PU through a system of tendering, keeping in view the under mentioned guidelines:
a) Decision on outsourcing shall be taken at the level of the Workshop / Factory In charge, with Finance Concurrence, except for certain critical components as excluded by the PHOD wherein criteria for out sourcing as and when needed will be finalised by HOD of Workshop for Zonal Railways only, in consultation with associate finance.
b) Pricing guidelines shall be established on the basis of in-house manufacturing-cost-excluding overheads and overheads to be added at commercial rates for cost comparison.

1105. Outsourcing or contracting for works within the Railway Premises.
In case of certain sub-assemblies, assemblies and critical items, it becomes necessary that manufacture, assembly and/or testing is carried out inside the Railway premises by the contracting party due to reasons such as:
a. Need to control of quality of raw material
b. Facilitate control of quality of workmanship through stage inspections
c. Specialized large-scale infrastructure needed for the manufacturing process may not be available with vendors.
d. Need for investment in costly specialized equipment, which are otherwise not usable by the vendor for other general products manufactured by the vendor. Since both these aspects will inflate his bid price which will ultimately get loaded on the cost of production. Special tooling required for the job
e. Component/processes forming part of an assembly line in the ProductionUnit or Workshop.
f. Logistical problems and disproportionate transportation costs.
1106. While outsourcing within the shop facilities, all safeguards in Para 1103 shall be ensured. In addition, to avoid contract disputes, care should be taken to see that following conditions are fulfilled and precautions taken:
a. Work area for the contractor to be separated from that of Railway staff
b. Shared machine and equipment time available to the contractor to be clearly defined to avoid mix up
c. Wherever raw material and consumables are to be supplied by the Railway, stock should kept separately and accounted for.
d. Consumption norms for raw materials and consumables to be evolved for each item issued to the contractor by the Railways
e. Documentation to be signed by both Shop Supervisor and Contractor
f. Electric power, water and utilities including tools provided by the railways tobe accounted and documented
g. Control of quality of workmanship by in process inspection
h. Accountal of scrap / left over material to be returned by contractor to be accounted and kept separate
i. Industrial safety standards as prevailing in the shop shall apply to the contract workers.
j. All relevant legal provisions and their compliance to be ensured.

Check list for precautions to be taken before contract is awarded for outsourcing work inside the workshop with outside labour.
Sl
No
Precaution To Be Taken
Yes`
No
1
Has separate work area for contractor been earmarked


2
Has requirement of Railway supplied consumables – like special electrodes, water, electricity etc. been computed and listed


3
Has material requirement for outsourced job been separately worked out


4
Has machine hours for use of Railway equipment for the job been computed and listed


5
whether payment to contract workers is being made through bank, in a transparent manner


6
Have contractor’s workers been issued separate ID


7
Is an accounting system in place for contractor supplied items, raw materials and consumables


8
Has workshop supervision been organized to check on the work


9
Has the contractor complied with all legal provisions required under law, for which the Railway has an onus of responsibility



Note: The answer to all the items is to be ‘yes’, Before outsourcing Contract is awarded.

Sunday, December 8, 2019

VISIT TO MUNNAR - THE HEAVEN BETWEEN TAMIL NADU AND KERALA



MUNNAR DETAILS
Munnar is the Tamil word meaning three rivers – Nallathanni(Potable water), Periya Kaanal(big canal) and Chinna kana(small canal)n l- as the place was developed by the Tamils who were taken there by the British to work in the tea plantations. Most of the laborers are oppressed communities from the southern and eastern Tamil Nadu. The tyranny of caste system was so unbearable, people preferred to run away fro their native villages to the hilly areas. The caste system became so rigid after the invasion of the Vijayanagara Empire which totally decimated the local Nadu system of administration to palayapattu and pandaravada divisions. While the rich and fertile palayapattus were kept with the Telugu nobles, the dry and red and black soil palayapattu were given to the Maravar caste which helped probably the invaders to quell the rebellion of the local Tamils. Thus the areas under Ramanathapuram and Tirunelveli which fell into the hands of Maravar castes,were forced to flee to the mountains in search of livelihood and peace. Until some forty years, there was not even a road to reach Munnar and Bodi Mettu was the last point up to which Ghat roads led to. From there people who were largely workers in the plantations, walked to the Munnar.
We have taken the journey via Madurai. On reaching Madurai, we proceeded to the central bus stand to take a bus to Theni. It takes about two hours to reach Theni from where lots of buses are plying to Munnar. It takes exactly three hours to reach Munnar. The border between Tamil Nadu and Kerala state is at the Bodi Mettu (Mettu – top view point) which is exactly in the middle distance between Theni and Munnar. The hills and valley view on the way to Munnar is very breath taking. The serpentine and meandering road is really living monument to human effort to transform nature for its own uses and the ability of the humankind to continuously wage war with nature.

Having arranged to live in a particular relatives’ house it was not a problem to reach the house on the by an auto rickshaw. No sooner we had lunch at 2.30 hours there was sever downpour for next two hours. Therefore, we could not move out of the house.
· Eravikulam (Rajamalai) National Park:[1] 45 mins from Munnar. See Nilgiri Thar (Hemitragas hylocres) - an endangered species of mountain goats, rolling grasslands and sholas, spread over 97 sq km in the Rajamalai hills, rare flora and fauna, Atlas moth (largest in the world), lion-tailed macaque, leopards, tigers, The Kurichi or Neelakurinji Flowers turn the hills of Rajamalai blue every 12 years. The next bloom will be in 2018. One can actually debate if going to the high peak just to see some goats is worth all the effort or not. However, the walk along the park is very romantic and has some breath taking view.
· Anamudi Peak inside Eravikulam National Park: The highest peak (2695 m) south of the Himalayas, towers over the sanctuary in majestic pride. The slopes of the hills abound in all kinds of rare flora and fauna. The Atlas moth, the largest of its kind in the world, is a unique inhabitant of the park. Other rare species of fauna found here are the Nilgiri Langur, the lion-tailed macaque, leopards, tigers, etc. An ideal place for trekking, facilities are provided here and tourists are allowed to go on foot up to Anamudi.
· Chinnar Wildlife Sanctuary,[2].
· Mattupetti Dam - 10km from Munnar, this popular picnic spot activities like boating and horse riding and is a great place to spend the day especially if visiting with children.
· Mattupetti Indo-Swiss Farm - Better known as Mattupetti (cattle village), Tamil migrant labourers had once upon a time reared cattle here. The cool climate and abundance of fodder made it the ideal location for the Indo-Swiss dairy farm. Established in 1961, the Kerala Livestock Development Board (KLDB) manages this highly specialised dairy farm. The dairy farm is a unique one of its kind with more than 100 varieties of high-yielding cattle being reared.


Echo Point
· Echo Point - 15km from Munnar, on the way to top station from Munnar is a small lake set amidst rolling hills. Every loud call made from a spot on the lake embankment is returned manifold by the echo from the surrounding hills. Young tourists throng to this place to listen to the echoes of their friendship calls.
· Top Station, [3]. 37km from Munnar on the Kerala and Tamil Nadu border, has great views of the Western Ghats. Top station is the "top"-tourist attraction. This place gives a real 'above the clouds' experience. Regular buses go to Top Station (1 hr) from Munnar. A jeep costs Rs 400. The area is known for the Neelakurunji plant, which flowers only once every twelve years. The flower is violet.
·
· Salim Ali (Thattekkadi) Bird Sanctuary, [4]. There are woodpeckers, Malabar gray hornbills, Ceylon frogmouths, parakeets, and rose-billed rollers. This sanctuary is located 20km from Kothamangalam on the road between Ernakulam and Munnar. There are basic and mid-range hotels in Kothamangalam and an Inspection Bungalow in Boothathankettu. You can take a boat cruise from Boothathankettu to Thattekkad. Admission Foreigners/Indian Rs 40/10.
water fall near Rajmala
· Marayoor - Around 40km from Munnar. It is the only place in Kerala with natural growth of sandalwood trees, natural caves with murals, and relics from Later Stone Age civilization. There is a sandalwood factory of the Forest Department of Kerala and a children's park extending across one hectare of land under the canopy of a single Banyan tree, all of which attract tourists in large numbers.
· Kolukkumalai Tea Estate - At a height of about 7130 ft, this orthodox tea factory lays claim to being one of the highest in the world. The view of the Western Ghats is absolutely enchanting.
· Blossom Garden - Houses many different varieties of flowers. Tourist will definitely take away good memories from this place.
· Water falls - Check out several natural waterfalls on the way to Munnar. These waterfalls carry fresh rain water. They provide an excellent place for all tourists to have photo shootout.
[edit] Do
· Walk in the Clouds - Trek to your hearts content while the clouds slowly descend upon you.
· Rock Climbing and Rappelling - Munnar has a steep rock face about 100ft.
· The Christ Church, in Old Munnar. The exteriors have worn out with time though the charming interiors still have a very nice ambiance. It was consecrated way back in 1910 and still has 14 original rows of pews. The first Catholic Church in the High Ranges was Mount Carmel Roman Catholic Church.
· The High Range Club has a charming colonial style. The club house is built of wicker and teak and is the social hub for the tea "Planters" of the region. Members enjoy lounging in the bar over Planter's Punch followed by a good meal, a game of billiards or reading a book in the library.
· Munnar Supply Association (MSA) Set up in 1900, this is another nostalgic landmark worth visiting in Munnar. It is the oldest department store in the area and has been re-inventing itself to stay relevant and popular after almost 102 years. The store was run by "planters" who still manage its affairs. The MSA is a red brick red tiled building with gables, buttresses and a porch and is now a heritage site.
· Boating There are several places to go out for boating in Munnar. One can choose among peddle boats, speed boats to Kashmiri-Shikara. Young couples who travel to Munnar should not miss-out on the beautiful 'Kashmiri-Shikara' boat ride. It is one of the most romantic experiences.
Buy
The best things to buy are Tea, coffee and spices like cinnamon, cloves, cardamom and pepper.
· Munnar Fancy, INTUC Building, GH Road, Munnar, Kerala, India - 685612. Ph:91-4865-232554 , Leo Gift House, D.M.Samuel & Sons , DMS Jewellery , Marakkar Shopping Centre Rahim Book Stall, Tel : 91-486-2530759 , DTPC stall, Tel: 91-486-2530682. Good for spices. Sunny Traders, Tel: 91-486-2530476. A tea shop.
· Shakthi Hills Computers,kanthalloor, Tel : 04865246444. Computer Stationary
[edit] Banks/Currency Exchange
· State Bank of Travancore, Tel: 91-486-2530274, State Bank of India, Munnar Tel : 91-486-2530381, State Bank of Travancore, Devikulam Tel : 91-486-2564234.
Eat
· TreeTop Restaurant, Autumn Trees in Devikulam,A Multi-cusine restaurant having 70 person seating capacity.Vegetarian food & Non-Vegetarian food available. Ph; 04865 264273, 264399 [5], Silverspoon restaurant, Munnar inn, Food Court, Munnar inn, [6] Saravana Bhavan - Right at the heart of town is the most inexpensive places to eat. The service here is quick and the food is absolutely DELICIOUS. But one has to be accommodating when eating at Sarvana Bhavan. You might have to share your table with others. This place provides south Indian dishes, served on a Banana leaf. Mahavir Jain Restaurant - Provides authentic North-Indian food. Meals at Mahavir Jain restaurant is a total hit. They provide meals ranging from Gujarati-meals to Punjabi-Meals. One cannot stop eating the delicious rotis at this place. However, compared to other restaurant, this places it slightly expensive. Meals start from Rs. 75/-
You can have tea and coffee from street side shops
BUDGET
· AUTUMN TREES RESORTS, [[[Devikulam, Munnar (Tarrif Rs.950 -2500) PHONE +91-4865-264273, [7] KASHMEERAM Resort, [8]. Kaippallil Resort Home stay, [9]. Royal Retreat, Munnar, [10]. Hotel Hill view, [11], 1km from Munnar. Munnar Inn, [12]. Edassery Eastend, [13]. Issac's Residency, +91-4865-230501/502/503, [14]. Highrange Inn, [15]. Elysium Gardens, [16]
[edit] Mid-range
· Hotel Westwood Riverside, [17], 1km from Munnar Town. Blackberry Hills, [18], 3 km from Munnar. Deshadan Mountain Resort, [19], 5km from Munnar. Copper Castle, Pothamedu Road, 2km from Munnar, [20]. Autumn Trees Resorts, Devikulam, Munnar(Tarrif Rs.800-1900)PHONE +91-4865-264273 / +91-4865-264399, E-mail:info@autumntreesmunnar.com, [21].
· Hotel Anai Mudi, [22], Munnar - Marayoor Route. Chancellor Resort, [23]. Chinnakkanal (22 kms. from Munnar Town on the way to Thekkady/Periyar). The Siena Village, [24]. Chinnakkanal (20 kms. from Munnar Town on the way to Thekkady/Periyar) Hotel Oak Fields, [25], Pothamedu (5km from Munnar). Camp Noel, [26], Pazhathottam, Munnar Camelot, 10 km from Munnar, - if you are traveling in your own vehicle then Camalot is a good choice. you need to drive 2 KM off road to reach the resort, which is fun. however if you are new to driving, leave your car at the entrance and ask the owner to pick you up from there. pack your food in town as the choice of food at resort is limited [27]. Bracknell forest, [28], Pothamedu (7km from Munnar).
Splurge
· Tall Trees, [29]. Pothamedu, 4km from Munnar.
· Best Western Fort Munnar, [30]. Chinnakkanal (22 kms from Munnar Town).
· Club Mahindra Lakeview Resort, [31]. Chinnakkanal (20 kms. from Munnar Town on the way to Thekkady/Periyar).
· Tea County, [32]. Munnar. Windermere, Bison Valley Road, outskirts Munnar, [33].
· Camp Noel, [34], Pazhathottam, Munnar.
Contact
· Main Post Office, Tel : 91-486-2530280.
Emergency numbers
· Police control room: 100 / Fire station: 101 / Ambulance: 101
Cope
Ayurvedic Treatment / Massage
· Swatic Ayur Care Centre , tel. -91-9447031656, 91-4865-231656,230395.
· Surya Ayurvedic Health Resorts, Chithirapuram, tel. 91-486-2563204.
Stay safe
Apply sun block lotion while you leave Munnar because as you descend the hills the weather gets warmer and causes sun burn.
Hospitals
· Tata General Hospital, Munnar Tel : 91-486-2530270
· Matha Hospital , Munnar Tel : 91-486-2530744
· Arun Hospital, Munnar Tel : 91-486-2530410
Get out
The nearest places of tourist interest are Thekkadi (wild life sanctuary), Kumuli Falls, Kodaikanal on the Tamil Nadu and Nilambur, wyanad and kuttanad on the Kerala side.

Saturday, October 26, 2019

RECRUITMENT IN RAILWAYS



RECRUITMENT

    Group ‘A’:  Group ‘A’ officers are recruited through UPSC and are placed in various organized services of the Railways such as IRPS, IRTS, IRAS, IRSE, IRSME, IRSS, IRSSE, IRSEE, IRMS etc.Some officers are recruited directly as special class apprentices. They are then imparted training in Railway Training Centre at Jamalpur. This mode of recruitment is restricted to Mechanical Department only.

some isolated posts in Security department direct recruitment is made through UPSC. Some officers are recruited by special recommendation and subsequently regularized by UPSC through selection. Eligible Group ‘B’ officers are also regularly placed in Group ‘A’ in accordance with the prescribed percentage after they are selected by a Departmental Promotional Committee, which includes an UPSC member.

Group ‘B’:The recruitment to Group ‘B’ service is made through selections from the eligible Group ‘C’ employees. 70% of the assessed vacancies are filled by regular selection and 30% of the vacancies are filled by LDCE.  Group ‘B’ posts in Civil Engineering, Mechanical Engineering, Electrical Engineering, S&T Engineering and Transportation are treated as safety categories for the purpose of empanelment, medical examination, etc.

Group ‘C’:Railway Recruitment Board makes majority of the recruitment to Group ‘C’. Normally such recruitments are made to initial grades.  Recruitment is also made by GM on Compassionate Grounds, Handicapped / Cultural/ Sports / Scouts quota, SC/ST special drive, etc.

RECRUITMENT OF STAFF LEVEL-1:  Recruitment to all Group-C (in LEVEL-1) will be done directly by Railway Recruitment Cell of the Zonal Railways instead of RRB.  The Recruitment Cell at HQ will be headed by Chairman (Dy.CPO) RRC& APO (Recruitment) and assisted by Group-C staff.  Recruitment of all Divisions / Workshops / Production Units and other organizations falling within the territorial jurisdiction of the Zonal Railway will be clubbed together and considered as one Recruitment Unit.

Recruitment shall be done at an interval of two years.  The vacancy is assessed after adding anticipated vacancy for the next two financial years on the accrued vacancy as on 1st of April of the year of recruitment.  The educational qualification shall be Matriculation or ITI or equivalent.  The age limit for recruitment is 18-28 years (now 28+2+2) and relaxable up to 3 years for OBC and 5 years for SC/ST candidates.

Future recruitments [Level-1 of the Pay Matrix of the 7th CPC]  (RBE No.31/2018) in Technical departments (i.e.) Civil, Mechanical, Electrical and S&T Departments) will be made on the basis of the minimum educational qualifications of 10th pass plus National Apprenticeship Certificate (NAC) granted by NCVT or 10th pass plus ITI in terms of instructions issued  vide RBE No.73/2017. [RBE No.148/2018]

Detailed employment notice shall be published in leading local newspapers and an ‘Indicate Notice’ be published in the Employment News and National Newspapers.  Candidates have to apply on line only along with self attested copies of SC/ST/OBC certificates.

The candidates have to give their option to a maximum of three in order of preference for the Division / Workshops / Production Units / Other organizations.  In case of combined examination for more than one category, then the candidate should also specify his preference for the posts.  No change of option is permitted at any stage later. Recruitment shall be conducted under the overall supervision of Chairman/RRC. Question Paper will be set by Chairman/RRC and printed with questions jumbled in four to five series.

The selection consists of Written Test, Physical Efficiency Test and Medical Examination.    The written examination question paper is consisting of 150 multiple choice objective type of two hours duration, printed in Hindi, English and Regional language(s).  The candidates have to answer the questions on the duplicate type Optical Mark Reader (OMR) sheets. The evaluation of answer scripts shall be done through computers.  Minimum pass mark is 40% for OC and 30% for SC/ST and OBC candidates

Physical Endurance Test:  PET is a qualifying test and passing of PET is mandatory. The number of candidates called for PET should be two times the number of vacancies. Call letter shall be sent to candidates 3 weeks prior to commencement of PET under Business Post.. In the PET, male candidates should be able to run for a distance of 1000 metres in 4 minutes 15 sec in one chance and the female candidates should be able to run for a distance of 400 metres in 3 minutes 10 sec. in one chance.  The entire proceedings of PET are to be video graphed so as to ensure transparency and the identification of bonafide candidates taking part in PET. PET will be held in the Divisions of the concerned Railway and DRM will be overall in-charge for the conduct of PET. PET will be supervised by Selection Committee of three Assistant Scale Officers nominated by DRM.  More than one Committee can be nominated as per requirement.  List of successful candidates qualifying PET will be signed by each member of the Selection Committee.

The panel will be based strictly on merit position obtained in the written examination.  Currency of panel shall be for a period of 2 years from the date of publication.  The currency of the panel may be e tended by one year by GM in case of administrative exigencies.
The recruitment to posts in GP 1800 is also made by empanelling the eligible casual labourers, substitutes, Compassionate Grounds appointment, Handicapped / Cultural/ Sports / Scouts quota, SC/ST special drive appointment etc.

General conditions (Group C Level):  Direct recruitments to Group C (above 1800 Level) posts are made through RRBs.  RRB makes recruitment on local/regional or All India basis. Regional/ local recruitment is resorted for recruitment to lower grade posts for which RRB or respective Railway Administration issues notifications in English/Hindi/regional language as decided.  All India basis recruitment is resorted for higher grade posts for which notification is to be issued in all leading newspapers. 

Notification of RRB is normally issued during May/June.  A time limit of at least 6 weeks is allowed from the date of advertisement for submitting applications. In the notifications conditions regarding scheme of examination, scale of pay, qualification, age, number of vacancies, training, stipend etc., are shown. Application forms of RRB are in English and Hindi.

The Nodal RRB in every Railway makes recruitment for ex-servicemen.

Friday, October 25, 2019

SINGLE FILE SYSTEM



SINGLE FILE SYSTEM

The main purpose of the single file system is to have the full picture of a subject in one file itself.

A Single file contains two parts, namely the correspondence portion on the left hand side and noting portion on the right hand side. There should be no noting on the letters attached to the files on the left hand side, except endorsement of Officers calling for file, marking previous reference numbers and references to other files. A file cover can run upto 300 folios. When a file grows to bigger size, another volume of the file should be opened with a fresh file cover. These fresh files will bear the same file number and the volume number is also indicated. The first volume is not marked as Volume I.

On the noting side of the file, only foolscap sheets should be used. Both sides of a sheet should be used for noting. The pages on the noting side are referred to as pre page and the letters on the left hand side of the file are referred to as Folio.

The filing procedure should facilitate easy collection of information, apart from eliminating possibility of manipulation at a later date. Folio number should be written in red and rounded at the right side top corner. In case a letter has more than one sheet, individual folio numbers should be given to each sheet.

In order to have easy access to letters and their replies, the dealing clerk should mark back references and forward references on the letters. There may be a reference to an earlier correspondence in the text of a letter and by underlining the same in red, respective folio numbers may be indicated. In some cases, the back reference may be in a different file, in such case the folio number and the case file number should be indicated.

Whenever a letter is put up with a noting, the clerk should examine the issue in the light of provisions of codes, manual and extant orders duly using their intelligence in analyzing the issue and come up with suggestions to help the officer to take a decision faster. The noting should be presented in a logical way and also the events in chronological order. The dealing clerk should ensure that there are at least one or two blank papers on the PP side while passing the file from one official to another. The dealing clerk should mend the files, which are damaged, before putting up the same. While putting up the noting, the folio numbers should be cross connected to avoid attaching flags. In case a link file is necessary, the folio number and the file number should be indicated in the noting and the noting should confirm “Linked file no……………….is attached”. All important letters should reach the concerned file without any delay.

The letter issued from the file should be condensed preferably in one page.  The wording should be short, but express the meaning fully. Whenever a draft letter is put up for approval in the file, references to folio number of the earlier correspondence should be indicated on the draft.  This should be continued even at the time of putting up the fair copy for the signature of the Officer.  Railway abbreviations should not be used in the letter addressed to outsiders and the expression should be courteous.  Invariably in all the letters the name and designation of the officer signing the letter should be mentioned, as the indication increases the sense of responsibility of the Officer and enhances the credibility of the letter at the receiving end.

Replies to important letters should be dispatched with the approval of the competent authority duly indicating in the letter that this is issued with the approval of........... If somebody else signs the letter.  Always the office copy of the letter should also have the copies of enclosures.  However if the enclosures are already available in the same file at least the folio number should be indicated under the enclosure list of the office copy.  It is always better to refer the letter no. of the addressee in a reply letter.  The dealing clerk should issue self-contained reminders without waiting for the instructions from the officers.
In order to avoid the loss of files in transit, when a file leaves a branch and is going to another branch, movement of the file has to be recorded to locate it later.  On the cover of each file, the name of the dealing clerk and the supervisor with their designation may be written. Papers of same size (A-4) may be used for making letters and notes. While using computer stationery the perforated edges may be removed so as to get paper of proper size.All correspondences to SR / PU / Other Units would be through Official NIC email.  All fresh instructions are to be uploaded on the home page of SR / PU / Other Unit website for at least 15 days and subsequently the same may be transferred to the designated location on the website. [PBC No.234/2018]

Advantages of single file system

1.    There is a system of maintaining one file for one subject.
2.    The filing procedure is systematic.
3.    Entire subject is contained in one file.
4.    Correspondences between branches are considerably reduced.
5.    Delay due to interchange of correspondence is avoided. 
6.    Views of another branch are obtained in the file.
7.    File linking is reduced.
8.    Workload of the clerk is reduced.
9.    Disadvantages of single file system
10.  Delay due to circulation.
11.  Possibility of loss of file in transit.
12.  Operation of parallel files due to urgency.



Sunday, October 13, 2019

Field Inspection List


OFFICE OF FA&CAO/MTP(R)/MS
INSPECTION MANUAL
PART I PERSONNEL


1.       Attendance Register
2.       Muster Rolls and Labour Pay Sheets
3.       Leave Accounts
4.       Service Records
5.       T A Journals And Bills
6.       Court Attachment Register
7.       Advances And Recovery Register
8.       Passes and PTOs
9.       Rent Rolls and Electricity Energy Charges
10.   Payment under WCA
11.   Register of withheld amounts from settlements



PART II NON-PERSONNEL


A.       WORKS
1.       Commencement Of Work
2.       Execution Of Work
a.       Work orders
b.      Tendering
c.       Disposal of tenders
3.       Contract agreements
4.       Register of agreements
5.       Contract management
6.       Contract payments
a.       Measurement book
b.      Contractors’ bills
c.       Contractors’ ledger
7.       Closing of accounts


B.      STORES


1.       Imprest stores accounts
2.       Tools and plant account
3.       Empties account
4.       Purchase orders
5.       Rails
6.       Sleepers and cement registers
7.       Ballast
8.       Adjustment memos
9.       Accounts of released material
10.   Check of Material At Site returns



          C MISCELLANEOUS
  1. Land management
  2. Auction sales
  3. Machinery and plant
  4. Log book for department transport hiring of vehicles and BSNL telephones
  5. Register of repairs to office equipment
  6. Clothing account
  7. Cash imprest account