Showing posts with label MANAGEMENT ACCOUNTING. Show all posts
Showing posts with label MANAGEMENT ACCOUNTING. Show all posts

Wednesday, September 16, 2009

SENSITIVITY ANALYSIS


SENSITIVITY ANALYSIS

1. simplest of handling risks
2. magnitude in the ROR by small change in the components of which are uncertain
3. selct variable –whose estimated values may contain significant errors or elements of uncertainty
4. key variables are – cost, price, project life, market share etc
5. Graph

Advantage:
1. identify crucial variables that makes greatest impact in the NPV of the project
2. graphical presentation – better visual appeal
3. by confining SA to adverse changes in the variable that can be reasonably expected to occur one can obtain range of NPV that can be reasonably anticipated
4. knowledge is helpful for making decisions

Railways Risk Factors:
1. land - delay in acquisition – litigation
2. earth work availability of sand
3. soil condition – geographical factors –weak/loose Eg TEN-NGC line due to weak soil
4. alignment due to local or popular demand Eg KRCL in Madgaon line in Goa State
5. availability of sleepers – wooden/ Pre Stressed Concrete Sleepers – snags in production- ban on wooden sleepers as environmental policy of the Govt
6. availability of rails – change in the production pattern of the steel mills – delay in production- change in the Govt policy
7. estimated earnings – net production of commodities short fall in projected and traffic due to climatic and natural causes – import and export potential
8. delay in rolling stock in ordered quantity Eg Hassan – Mangalore line for transport of ore to Port of Mangalore diverted to road
9. cost and time over runs – likely delay due to paucity of funds/allotment

RISK ANALYSIS


RISK ANALYSIS
- Study of risk/uncertainty factor of any investment proposal
Factors of uncertainty
1. process or product becoming obsolete
2. decline in demand
3. change in Govt policy in business
4. price fluctuation
5. foreign exchange restriction
6. inflationary tendencies

Techniques
I. Conservative: 1. Short Pay Back Period
2. Risk Adjusted Discount Rate
3. Conservative Forecasts of Certainty
Equivalent
Ii. Modern Methods:1. Sensitivity Analysis
2. Probability Analysis
3. Decision Tree Analysis

I. 1. Short Pay Back Period: Projects with short pay back period are normally preferred to those with longer pay back period. It would be effective when it combined with a cut off period. The cut off period denotes the risk tolerance level of the firm.

I. 2. Risk adjusted discount rate: Under this method, the cut off rate or minimum required rate of return is raised by adding what is greater.

I. 3. Conservative forecasts of certainty equivalent: It deals with the uncertainty in cash flow. Under this method, the estimated risks from cash flows are reduced by employing initiative corrective factors or certainty equivalent coefficient, which is calculated by the decision maker subjectively or objectively. Normally, this coefficient reflects the decision maker’s confidence in obtaining a particular cash flow in a particular period.

II.1. Sensitivity analysis:SENANA.DOC

II.2. probability analysis: The measure of some one’s opinion about the likelihood that an event (cash flow) will occur. The range of probability is 1 to 0. That is 100 % certain to 100% uncertain. The measure can be classified into 1. Optimistic 2. Pessimistic 3. Most likely based objective or subjective factors.
II. 3. Decision tree: In this analysis alternative course of action are charted into a form of branches left to right. The nodes represents either the chance event (denoted by a circle) and a decision point (denoted by a square). The process starts from the extreme right hand decisions and travel stage by stage along the branches that maximize interest. This process is known as Roll Back Method.

MARGINAL COSTING

M A R G I N A L C O S T I N G


1. Other names:
Direct costing, Variable costing, Differential costing, Incremental costing, Out of pocket costing
2. Marginal cost means -
v The amount by which the total cost varies as a direct result of the change in the volume of production by one unit.
v When used in the plural as ‘marginal costs’ – it means the total of all variable costs.
v Marginal Cost is the amount at any given volume of output by which aggregate costs are changed of the volume of output is increased or decreased by one unit. In practice this is measured by the total variable cost attributable to one unit.( By the Institute of Costs and Works Accountants, London)

v Marginal costing is defined as “the ascertainment of marginal costs and of the effect on profit of changes in volume or type of output by differentiating between fixed costs and variable costs”.
v Thus, all the costs attributable to a product are broadly classified into two viz. fixed costs and variable costs.
v Fixed costs are those elements of the cost of production which are not affected by variation in the volume of output – i.e. under normal conditions; fixed costs remain constant irrespective of the volume of output.
v On the other hand variable costs are those elements of cost which tend to vary directly with the volume of output. The total of all such variable elements of the cost of a product is called the marginal cost of that product.
v The difference between the selling price and the marginal cost of a product is called “contribution” which is the most significant aspect of marginal costing. All the decisions made with the help of marginal costing are based on this concept. It is also called “gross margin”. All the products are expected to “contribute” towards a fund from which the total of all fixed costs is deducted, the surplus being the profit.
v Thus, the contributions of all products (or all units of the product) represent (a) Sales less variable cost or (b) fixed costs plus profit (or fixed cost less)
v Since much emphasis is placed on this concept of contribution, we can frame an equation as follows:

Marginal Cost Equation:
Sales – Variable Costs = Fixed Costs + Profit = S-V = F+P
v The following specimen of cost statement will show the components of marginal cost and total cost (i.e. the different types of variable costs and the fixed costs)
Cost Statement Rs.
Direct Materials XXX
Direct Labour (Wages) XXX
Direct Expenses XXX
-----
Prime Cost XXX
Variable overheads XXX
Marginal cost of Production XXX
Fixed Overhead XXX

3. Special features of marginal costing method:
v Separation of fixed costs and variable costs. Marginal costs (variable) above are considered to be the cost of the product in marginal costing unlike in the orthodox system – vi. Absorption or total costs costing.
v Valuation of stock-in-trade
v Like the cost determination, calculation of the profit, also done in a special manner in marginal costing method. First the marginal cost of production will be deducted from the sales; the remaining proceeds are known as “contribution”. The Contributions of all the products are brought into a pool from which the total of fixed costs will be deducted. If there is any surplus after meeting the fixed costs, it forms the profit.
v Fixed costs are not apportioned to the individual products under marginal costing. This is the basic and salient principle of marginal costing.
v The profitability of each department or product will be determined by its contribution. From the sum total of these contributions, total fixed costs will be deducted to arrive at the profit.
v The significance of the concept of contribution is well explained in this method (marginal costing method). When fixed costs are apportioned to the cost centres individually certain products may show a loss.
4. Illustration of cost statements:
1. ABSORPTION COSTING 2. MARGINAL COSTING

ParticularsCost per 100 unitsCost per 120 unitsParticularsCost per 100 unitsCost per 120 units

Variable Expenses :1500 1800 1500 1800
Direct Materials
Direct Labour 1,000 1,200 1,000 1200
Variable overheads 600 720 600 720
Fixed Expenses 1,500 1,500 Marginal costs 3,100 3,720

Total Cost 4,600 5220 Marginal cost per unit 31 31
Cost per Unit 46 4,350


5. Uses of Marginal Costing Method:
v Fixing the price of the product :
Pricing under Trade depressions
(operate or shut down decisions)
Pricing in a special market
- Pricing in a special job (accepting a special order)
v Effect of changing the prices on profits
With the help of marginal costing technique, the following questions can be answered:
1. What is the effect of a change in price on the present profits?
2. What should be the volume of sales in order to earn a given profit?
3. What will be the profit for a given volume of sales?
4. Which is the most profitable product?
When management plans to expand output, normally the cost per unit will be reduced, enabling a price reduction. Again to attract a wider market, the selling price may be reduced. Therefore, the management is willing to know the effect of such a price change on the profits.
v Make or Buy decision
v Product Mix or Sales Mix
v Planning the volume of production (or level of activity)
6. Advantages:
v Marginal costing method clearly explains the nature and behaviour of the various costs incurred in the production of a particular product.
v Marginal cost statements provide for the data regarding the cost-volume profit factors that are required by the management for profit – planning.
v Marginal cost statements and reports give a more clear picture regarding cost of production and they are easier for the management to understand. For example, the impact of fixed costs on the volume of profit is well depicted by summarizing the fixed costs in the profit statements.
v The concept of contribution facilitates the relative appraisal of the profitability of the various products, product mixes sales territories etc. This is feasible because under the marginal costing technique, costs are classified as variable and fixed and the incidence of fixed costs is considered separately.
v Marginal costing is contributing to cost control plans such as standard costing and flexible budgeting.
v As illustrated earlier, marginal costing method is of immense use to the management in its area of decision making as in fixing the prices, determining the sales mix, closing down a business venture, planning the level of activities buying a component from outside etc.
7. Limitations of Marginal Costing:
v It is always difficult to bifurcate all the elements of costs rigidly into fixed and variable ones. Very often, arbitrary classifications are made to segregate the fixed and variable costs.
v In the long run, all the costs are variable i.e. even the fixed costs will vary at different stages in the long term. Therefore long range pricing and other policy decisions cannot rely much on the marginal cost analysis.
v Valuation of inventories and profit estimations on marginal costing basis are objected to by Tax Authorities.
8. Areas of application in the Railways
v Make or Buy decisions - in various Railways Workshops
v Fixing the tariff - Station to Station rates
v Pricing in a special job - Deposit Works.



***************
***********
*****

BREAK EVEN ANALYSIS


B R E A K- E V E N A N A L Y S I S
1. What is?
Profit maximization the ultimate objective of all business concerns. Profit is the resultant of the interplay of costs, price and volume.
v By a study of break-even-analysis, the managements knows how much sales, both in units and in value should be effected to avoid loss at the least.
v Cost-Volume-profit analysis (known otherwise) is an attempt at systematic study of the relationship existing among these variable factors and it analysis the effect of a change or changes in these factors on profits.
v It is an integral part of profit planning.
2. Breakeven Point (BEP)
v Total costs incurred total value of sales made = No loss or profit
i.e. Sale proceeds = Total costs (Fixed & variable = BEP
If sales go up beyond BEP = Profit
If sales come down = Loss
v A sale at Break-even point is the minimum amount of sales to be effected to avoid loss.
v BEP is an extension of the principles of marginal costing
v Break-even chart is a primary form of profit graph, which is a useful device to the management to inform the effects of changes in costs, volume and revenue.
Let us now construct a break-even chart on the basis of the following information (illustrativey)
Selling price - Re.0.40 per unit
Variable cost - Re.0.20 per unit
Fixed costs - Rs.2, 000
(Maximum)
From these data we can derive the following table to construct the chart
v The excess of actual sales over the break-even sales is the margin of safety
v Higher the margin of safety more will be the profits for the organization, because only after reaching the BEP, sales bring forth profits.
v This concept is useful in times of depression when the sales are gradually declining
v M-S = Actual sales – Break-even sales x 100
Actual sales
4. Angle of incidence (Profit angle or profit path)
v It indicates rate at which profit is earned in an organization after crossing the BEP.
v A wide angle represents a higher rate of profit earning and a narrow angle implies relatively a low rate of return.
v The consideration of the angle of incidence arises only after meeting the entire amount of fixed costs. Therefore the nature of angle depends upon the incidence of variable costs.
v A narrow angle indicates that variable costs form relatively a large part of the cost of the product and vice-versa
5. Profit-Volume-Ratio (P.V.R.)
v It indicates the relation between the sales value and its corresponding contribution.
v It explains the rate at which sales are contributing towards the recovery of fixed costs and profits.
v A high ratio means that the BEP is achieved sooner after which profit is earned at a higher rate and a low ratio implies the opposite.
v PVR = Sales – Variable costs (i.e. contribution) x 100
Sales
(Profit here means contribution)

Formulae:

v
P.V.R. = S-V x 100 S Where S = Sales Value V = Variable cost S-V = C (Contribution)
M.S. = P/PVR Where P = Profit

Volume of Sales = F+P / PVR Where F = Fixed Costs P= Profit
BEP (In value) = F/ PVR Where F = Fixed costs
BEP (In Units) =F/P-V Where F = Fixed costs P = Price V = Variable costs
Illustration:
The accountant of ABC Company Ltd. provides the following data for the year 1978:
Sales 15,000 units @ Rs.4 per unit = Rs.60, 000
Variable cost @ Rs.2 per unit = Rs.30, 000 (50%)
-------------
Contribution = Rs.30, 000
Less Fixed Costs = Rs.18, 000
-------------
Profit = Rs.12, 000
------------
You are required to find out the following:
a) Profit = Volume Ratio
b) Break-even Point and
c) Margin of safety

Workings:
a) Profit – Volu me Ratio = S – V x 100
S
P.V.R. = 60,000 - 30,000 x 100 = 50%
60,000
b) Break-even Point = Fixed costs
P/V Ratio
= 18,000 = 18,000 x 100 = Rs.36000
50% 50
c) Margin of Safety = Profit
P/V Ratio
Ms = 12,000 = 12000 x 100 = Rs.24000
50% 50
The results can be verified as follows:
Break-even Point Sales = Rs.36, 000
At this level the total costs are –
Fixed costs = Rs, 18,000
Variable costs = Rs.18, 000 (50% of sales)
------------
Total cost = Rs.36, 000
------------
Margin of Safety = Rs.24, 000
Sales beyond break-even point constitute the Margin:
.
. . Ms = Actual sales – BEP
= 60,000 – 36,000
= Rs.24, 000


******************
****************

Tuesday, September 15, 2009

RATIO ANALYSIS

RATIO ANALYSIS OR ACCOUNTING RATIOS

01. Ratio Analysis:
v A ratio is simply a quotient of two numbers.
v This is an instrument for diagnosis of the financial health of an enterprise.
v It does by evaluating important aspects of the conduct of business like liquidity, solvency, profitability, capital gearing, etc.
v It is an invaluable aid to management in the discharge of basic functions of forecasting, planning, co-ordination, communication, and control.
v The technique used by Accountants to facilitate the discussion of the questions ( a few are listed below) listed below is Ratio analysis -

-
Profitability Are the profits adequate for the capital employed?
Solvency Can the concern repay its creditors?
Ownership What extent of the business is financed by its creditors?
Financial Strength Has it got sufficient resources to enable it to expand?
Trend Are the profits on a rising scale or Are they falling away?
Gearing How certain are dividends?

02. What they are:
v Pure ratios - (e.g. = 2:1) (Current Assets: Current Liabilities).
v No. of times -(e.g. : Stock Turnover being 6 times a year)
v Percentages - (e.g.: 30% Gross profit on Sales).
03. Handling of Ratios:
By itself may be meaningless unless it is interpreted against some standard and analysed on a comparative basis.
v Usefulness depends upon the ingenuity and experience of the analyst who employs them.
v Properly used, can assist for improving efficiency. In the wrong hands, may mislead.
04. Why Ratios?
v Absolute figures are often misleading.
v The value of absolute figures increases manifold if they are studied with ratio analysis.
v Ratios enable mass of data to be summarised and simplified for presentation to management for decision making.
v "Time series analysis" - the comparison of ratios of the same company over a period of time for evaluating the CO's financial condition and profitability.
v "Cross Sectional Analysis" an analysis of the future based on projected financial statements. It may also be in comparison with those of similar companies in the same line of business and with an industry average.
v Past ratios indicate trends in costs, sales, profit and other relevant facts. For forecasting likely events, they may be very useful.
v By accounting ratios, the plans made can be 'signposted'.
v To establish the desirable co-ordination or balance they may be used.
v Control of performances (e.g. Sales quotas) as well as control of costs may be materially assisted by the use of ratios.
v Ratios may be used as measures of efficiency for inter-firm and intra-firm comparisons.
v Ratios can play a vital role in informing what has happened.
v If properly selected, correctly calculated, and timely presented, accounting ratios often prove very handy and useful tools for helping the management to have a clear grasp of the trend of the business resulting from the policy followed so far.

05. Limitations
Ratio analysis has a number of pitfalls:
v Ratios are calculated from the data drawn from accounting records. As such, it suffers from the inherent weakness of the accounting system itself which is the source of data.
v Ratios compared from single set of figures will not have much significance. They must be compared with independent standards. But, as ratios share with other statistical concepts the fact that all the limitations of the latter in the determination of a proper standard for comparison can't be ignored
v Ratios are clues, not bases for immediate conclusions. They are only the means to reach conclusions and not conclusion in themselves. They give just a fraction of information needed for decision making.
v Conclusions from analysis of statements are not sure indicators of bad or good management. They give room to suspicion and should be carefully looked into. For example, a high inventory turnover generally considered to be indication of operating efficiency may be temporarily achieved by unwarranted price reduction or failure to maintain stock-in-hand.
v As ratios are simple to calculate and easy to understand, there is a tendency to employ them profusely. When too many ratios are calculated, they are likely to confuse instead of revealing meaningful conclusions.
v Different agencies adopt different definitions, thereby making the ratios non-comparable.

06. Classification of Ratios:

Structural point of view Balance sheet ratios, Profit & Loss Account ratios, Composite Ratios.
Functional point of view - Solvency Ratios, Profitability Ratios, Efficiency & performance Ratios.

STRUCTURAL POINT OF VIEW
RATIO ANALYSIS
BALANCE SHEET RATIOS
PROFIT & LOSS ACCOUNT RATIOS
COMPOSITE RATIOS
Current (or 2 to 1) Ratio.
Gross Profit Ratio
Return on Proprietor's Fund.
Quick Ratio or Liquid Ratio or Acid Test Ratio.
Net Profit Ratio
Return on Proprietor's Equity.
Proprietory Ratio.
Expense Ratio
Return on Equity Share Capital
Assets Proprietorship Ratio.
Operating Ratio
Return on Capital Employed.
Debt-Equity Ratio.
Stock Turnover Ratio
Return on total Assets
Capital gearing Ratio.
Turnover of Fixed Assets.
Turnover of Total Assets.
Turnover of Working Capital.
Debtors' Turnover
Creditors' Velocity

FUNCTIONAL POINT OF VIEW
RATIO ANALYSIS
SOLVENCY
PROFITABILITY
EFFICIENCY
&
PERFORMANCE
SHORT TERM
IMME-DIATE
LONG TERM
Gross Profit Ratio
Solvency Ratio

Current
Ratio
Quick
Ratio
Proprietory
Ratio
Net Profit Ratio
Capital Gearing Ratio



Dividend Per Share Ratio
Stock Turn Over Ratio
Return on Capital Employed
Operating Ratio
Return on Equity
Expense Ratio


Return on total assets etc.
Turnover of Total assets etc.
07. Operating Ratio - in Management Accounting:-
v This is obtained by dividing the total of the cost of goods sold plus operating expenses by the amount of sales. Lower the ratio the better it is! The ratio is calculated as
Cost of goods Sold + Manufacturing, Administrative, Selling Expenses and financial Expenses
X
100
Net Sales

v A comparison of operating ratio would indicate whether the cost content is higher or low in the figure of sales.

v A rise in the operating ratio indicates decline in efficiency;

Net Profit Ratio + Operating Ratio = 100

v This is the most general measure of operating efficiency and is important to managements in judging its operations.

v In general, for manufacturing concerns, operating ratio is expected to touch a percentage of 75 to 85.

v The difference between the operating ratio and 100 is the ratio of operating profit to net sales. Lower the operating ratio, higher the margin of profit.

v While this ratio serves as an index of overall efficiency, its usefulness is limited by its vulnerability to changes resulting from management decisions.

08. Inventory Turnover Ratio (or Stock turnover Ratio or Inventory Ratio). (in Management Accounting).

v It shows the number of times the stock is turned over during the accounting period. It is the ratio between the average stock (i.e. Closing Stock + Opening Stock divided by 2) held and the cost of sales (Opening Stock + Purchases - Closing Stock).

v For Example, the opening stock, purchases and closing stock of a company are Rs.18, 000/-, Rs.3, 44,000/-, Rs.20, 000/- respectively. The Stock turnover ratio is worked out as
X
= 18 timesCost of Goods Sold 3, 42,000
Average Stock 19,000

v High inventory turnover indicates that more sales are being produced by a unit of investment in stocks and thus reflects an effective inventory management.

v A low turnover ratio may indicate that the concern has accumulated unsaleable goods or may be the inventories are over valued.

v It affords useful information whether capital is being locked-up in slow moving stocks or whether Gross Profit may be increased by reducing prices in order to induce a rapid rate of turnover. Therefore, an increase in the ratio may indicate expansion of the business and a decrease the opposite.

v This ratio can be improved in one of the three ways.
By keeping sales at the same level, while reducing the stock of finished goods.
By increasing sales, while keeping the stock of finished goods at the same level.
By increasing sales, while at the same time reducing the stock of finished goods.
v This ratio also shows whether the concern is indulging in overtrading or undertrading. A sharp increase in this ratio along with sharp increase in the ratio of inventory to working capital may indicate over trading, and a sharp fall in this ratio may indicate undertrading.

09. Return on Capital Employed [or on investment (ROR)]
Ratio - 1
v
Return of Capital Employed
=
Profits
X
100
Capital Employed

Ratio - 2
v Return on Capital Employed
=
Profit
X
Sales
X
100
Sales
Capital Employed

v Ratio 1 -reveals the efficiency of trading operation of the business. It is a profitability ratio.

v Ratio 2 -reveals the degree, of success in the utilization of capital used in the business. It is a capital-turnover ratio

v A business might be efficient in trading operations, showing a high profitability ratio. But this may be accompanied by excessive employment of capital in relation to the value of sales achieved by the business.

10. Common standards:

v Ratios in themselves are meaningless unless they are compared to some appropriate standard.

v What is an appropriate standard? It is very difficult to answer. It is only mental generalisation of what is adequate and normal. There are four common standards used in this connection. They are as follows:

1. Absolute Standards.
2. Historical Standards
3. Horizontal Standards.
4. Budgetted Standards.

v 1. Absolute Standards are those which become generally recognised as being desirable regardless of type of company. However, there can hardly be an independent absolute standard which is desirable in all cases.

v 2. Historical Standards (also known as Internal Standards) involve comparing a company's own past performance as a standard for the present or future. It simply shows that the current period is better or worse than the past. However, it does not provide a sound basis for judgement, as historical standard may not have represented an acceptable standard.

v 3. Horizontal Standards (also known as External Standards) compared one company with another company or companies of the same nature. We know that no two companies are similar variations in accounting methods lead to significant differences in ratios. Such industry standards are periodically published in the Reserve Bank of India Bulletin and other financial dailies.

v 4. Budgeted Standard is arrived at after preparing the budget for a period. Such standards may be set by management as goals. They can be very useful because they are evolved after taking into account the prevailing conditions and the specific company situation. In fixing the budgeted standards, the management has to pay due attention to historical as well as horizontal standards.

11. Railway Financial Ratios:

v Financial Ratios: - The financial efficiency of operating an enterprise can best be seen from the 'financial ratios' which are worked out from the Statement of Profit and Loss for the year and the Balance Sheet (of Assets and Liabilities) as at the end of the year. The glossary of terms which should be used in Railway Estimates and Financial statements is given in para 308-F.
v The important financial ratios, applicable to Indian Railways, may now be described as shown below: -

(a) Operating Rate, i.e., percentage of gross working expenses [item (xiii) of para 308-F] to gross earnings [item (vi)] of para 308-F).

(b) Return on Capital -
(i) Percentage of (revenue) surplus (item xxi of Para 308-F) to Capital-at-charge (item xxii of para 308-F).

(ii) Percentage of net receipts (item xix of para 308-F_ to Capital-at-charge.

(c) Current Assets/Liabilities -
(i) Stores in stock in terms of month's consumption.
(ii) Work-in-progress (workshops) as a percentage of the value of workshop outturn.
(iii) Stores Inventory (stores, 'purchases', 'sales', and miscellaneous advance, capital, etc.,) as percentage the total issue of stores.
(iv) Unrealised earnings at the year-end in terms of number of days, earnings.

v The above ratios, compared from year to year, provide useful information for judging the financial performance of the Railways.

v Glossary of terms used

(i) Coaching Earnings (less refunds)

(ii) Goods Earnings (less refund)

(iii) Traffic Earnings = (i) + (ii)

(iv) Sundry Other Earnings (Less refunds) = Other than Traffic Earnings.

(v) Gross Earnings = (iii) +) iv) = true or accrued earnings in an accounting period whether or not actually realised.

(vi) Suspense.

(vii) Gross Receipts = (v) + (vi) = Earnings actually realised during an accounting period.

(viii) Miscellaneous Receipts = Guarantee recoverable from State governments + Other Miscellaneous Receipts, such as Government share of surplus profits, sale of land of subsidized companies, receipts from surcharge on Passenger fares, etc.

(ix) Total Revenue receipts = (vii) + (viii)

(x) Ordinary Working Expenses = Expenses booked under final heads, excluding appropriation to Depreciation Reserve Fund, and Pension Fund. (Payments on account of accident compensation and Pensionary payments should also be excluded).
(xi) Appropriation to Depreciation Reserve Fund.

(xii) Appropriation to Pension Fund.

(xiii) Gross Working Expenses = (x) + (xi) + (xii) = True expenses in an accounting period whether or not actually disbursed.

(xiv) Suspense.

(xv) Gross Expenditure = (xiii) + (xiv) = Working, Expenses actually disbursed during an accounting period.

(xvi) Miscellaneous expenditure = surveys + Land for subsidized companies; subsidy + other Miscellaneous Railway Expenditure. Appropriations to Pension Fund relating to Railway Board and Miscellaneous establishments booked under grants 1 & 2 and Accident Compensation, Safety and Passenger Amenities fund and Open Line Works (Revenue_ expenditure, and payments to worked lines.

(xvii) Total Revenue Expenditure = (xv) + (xvi)

(xviii) Net earnings = (v) - (xiii)

(xix) Net Receipts = (ix) - (xvii)

(xx) Payments to General Revenues.

(xxi) Surplus/Shortfall = (xix) - (xx).

Note: The "Surplus or Shortfall" shown in item (xxi) differs from the "gain or loss" given in Account No.110 of the Finance and Revenue Accounts of the Government of India, as besides dividend, the former takes into account all the Miscellaneous Receipts (viii) and Expenditure (xvi) attributable to a Railway, whereas the latter does not.

(xxii) Capital-at-charge represents the Central Government's investment in the Railways by way of Loan Capital and value of the assets created therefrom.

12. Railway Operating Ratio: (Time series analysis)
Year @
Indian Railways
Southern Railway
1991-92
89.5%
117.81 %
1992-93
87.4%
118.51 %
1993-94
82.9%
110.60 %
1994-95
82.6%
109.47 %
1995-96
82.5%
105.62%
1996-97
86.2%
106.98 %
1997-98
90.9%
111.81 %
1998-99
93.3%
114.29 %
1999-2000
93.3%
114.29%
2000-01(RE)
98.5%
-
2001-02 (BE)
98.8%
-

v Cross Sectional Analysis

RAILWAYS
INDIAN ZONAL RAILWAYS
1992-93
1993-94
1994-95
1995-96
1996-97
Central
76.51
74.33
77.97
80.79
84.38
Eastern
98.40
93.49
91.79
95.83
97.71
Northern
86.51
81.65
83.25
80.45
83.56
North Eastern
182.67
174.06
177.39
158.21
164.74
North East Frontier
187.88
186.70
186.51
196.01
210.74
Southern
118.51
110.60
109.47
105.62
106.98
South Central
85.76
81.98
84.03
78.98
80.96
South Eastern
69.00
65.18
62.75
63.93
68.73
Western
70.87
67.83
64.90
64.66
69.52
Total Indian Rlys.
*87.36
*82.93
*82.64
*82.45
*86.22



13. Ratio of net revenue to capital-at-charge:
(Please see annexure enclosed)


14. Railway inventory turnover ration (Excl. Fuel)

Year
Indian Railways
Southern Railway
Central Railway
1991-92
20.97 % (RE)
24.19 %
-
1992-93
21.93 % (BE)
36.53 %
-
1993-94
-
22.34 %
28.15 %
1994-95
-
16.81
22.54 %
1995-96
-
12.80 %
17.77 %
1996-97
12.00 %
9.69 %
16.00 %
1997-98
11.00 %
10.58 %
13.35 %
1998-99
-
13.12 %
-
1999-2000
11.00 %
14.33 %
-
2000-2001(RE)
14.00 %
-
-
2001-2002 (BE)
14.00 %
-
-

TOOLS & TECHNIQUES

TOPIC - 1

MANAGEMENT ACCOUNTING

MANAGEMENT REPORTS AND CONTROLS

01. Concept of Management Accounting:
v The techniques termed as 'Management Accounting' first in 1950 by British Team of Accountants (Anglo American Productivity Council).
v Internal administrative aid to business management. A Management tool.
v Two Terms - (1) Management (2) Accounting.
v Management is the substitute of ‘Guess Work' or 'Hit or Miss' method. Objectives - to study the operating problems on the basis of facts and to work out the best use and application of human and material resources.
v 'Accounting' - analysing, interpreting the transactions in terms of time, quantity and money. Financial - cost - Management Accounting.
v Definition of 'Management Accounting' - "The presentation of accounting information in such a way as to assist the management in the creation of the policy and day-to-day operation of an undertaking" - by: Anglo American Productivity Council.

v Objectives:
v Devices employed to achieve the objectives.
Forward looking principle.
Target setting principle.
The principle of exception.
02. Evolution:
v I Stage - Financial recording - Double entry system of Book-Keeping.
v II Stage - Scientific cost ascertainment - Cost Accounting.
v III Stage - Integration of cost and financial Accounts.
v IV Stage - Business forecasting, Budgeting and standard costing.
v V Stage - Budgetary control - not merely knowing the cost of production
but also controlling the costs.
03. Scope of Management Accounting:
v Financial Accounting.
v Cost Accounting.
v Budgetary and forecasting.
v Cost control procedure.
v Statistical methods.
v Legal provisions.
v Organisation and Methods.
04. Functions of Management Accounting:
v Modification of data.
v Analysis and interpretation of data.
v Facilitating Management Control.
v Formulation of Business budgets.
v Use of Qualitative information.
v Satisfaction of information needs of Management.
05. Emphasis of Management Accounting:
v Emphasis on future/use of budget.
v Involve a process selecting and discrimination of data - use of 'costs' in decision making process.
v Emphasis on the behaviour of cost elements - division of costs into - fixed, semi-fixed, variable and semi-variable.
v Establishes relationship between cause and effect of any significant business activity.
06. Advantages:
v Elimination of intuitive management.
v Enables to get maximum return.
v Continuous method of comparing results with standards, etc.

07. Stages:

Re-arrangement
®
Adoption
®
Analysis
®





¯
Mental Revolution
¬
Explanation
¬
Diagnosis
¬


v
Re-arrangement
:
Classifying the financial data etc.
v
Adoption
:
Processing of financial data
v
Analysis
:
Interpreting the financial statement.
v
Diagnosis
:
The causes and the effects i.e., result of the financial statement.
v
Explanation
:
Suggestion i.e., the result of analysis and diagnosis.
v
Mental Revolution
:
The concept of human psychology regarding the introduction of Management Accounting.

08. Tools and Techniques of Management Accounting.

v Management of today is not satisfied with only post-mortem examination of accounts and records; it seeks guidance from accounts in its management functions. It is not an easy job to arrive at any concrete management decision unless it is accentuated on some aids or medias. So certain medias or tools are necessary to reach the target.

v Therefore, Management Accounting employs tools and techniques in order to discharge its duty of helping the management in planning, co-ordination control and appraisal of activities. They are as follows:

v Analysis of financial Statements.

v Ratio Analysis.

v Cash Flow & Fund Flow Analysis.

v Statistical & Graphical Techniques.

v Costing Techniques.

v Standard Costing & Variance Analysis.

v Budgetary Control.

v Total Cost & Marginal Cost Analysis, Break-even and Profit Volume Analysis.

v Inventory Management.

v Financial Planning & Control.

v Evaluation of Capital Project & Returns on Investment.

v Communication & Reporting.

The above analysis may lead to two things viz.

i) Show areas where immediate management action is necessary.

(ii) Serve as the basis for formulation of regular plans for the future.

Ratio Analysis may throw up data for action in spheres or profitability, solvency of the business etc.

Flow of funds Analysis may disclose important features on the basis of which working capital requirements, stock holding, cash requirements cash position, etc, may be modified and revised.

Marginal Cost Analysis assists in policy decisions regarding utilisation of spare capacity, sales mix, cost control etc.

Data from the above analysis are used for establishing budgets and standard cost for future periods.